The Derwent Valley Mills World Heritage Site must be connected to the National Cycle Network

Derbyshire aims to be the UK’s most connected cycling county but the only UNESCO World Heritage Site in Derbyshire (and in the East Midlands) has totally inadequate cycling provision

Red lines show the National Cycle Network, green area is the Heritage Site and buffer zone

England has only 18 sites inscribed as UNESCO World Heritage Sites and Derbyshire is honoured to be the location of one of them, the Derwent Valley Mills, which is recognised for the birth of the factory system and as the first location worldwide to see large scale industrial activity in a rural landscape.

The Derwent Valley Mills Heritage Site is 15 miles from end to end and cycling would offer an excellent and sustainable way for visitors to travel between the various attractions. However, uniquely amongst the English World Heritage Sites, the facilities for cycling are totally inadequate.

The Derbyshire Cycle Plan, supported by Derbyshire County Council, declares that they want Derbyshire to be the “most connected cycling county in England”. Until there is cycle access throughout the only World Heritage Site in the East Midlands that goal is unachievable.

The National Cycle Network has good connections to Derby at the southern end of the Heritage Site, the High Peak Trail (NCN 54) terminates near Cromford and there is a new route north from Matlock (NCN 680). However, apart from Darley Park at the southern end, there is no National Cycle Network within the World Heritage Site.

The Derwent Valley Trust is calling for a high quality traffic free cycleway to be built through the World Heritage Site to enable Derbyshire to deliver on its “most connected cycling county” goal and for all the commuting and tourism benefits that the route would provide. The economic case for the route is already established and shows a Very Good 4.8:1 return on investment.

Surely the UK Government would want to demonstrate their commitment to cycle travel by providing good quality access to, and through, all the UNESCO World Heritage Sites in the country? And, surely Derbyshire won’t be able to claim to be the most connected cycling county when the only English World Heritage Site without good cycling provision is within Derbyshire?

More information is available in this document.

Similar Posts

  • Push Bike Paul

    Back to news and articles ← We’re delighted to be able to share Paul’s story; highlighting the benefits of donating an old bike, rather than throwing away… please have a read!“From being a child I have always been interested in bikes and how they work and was often ‘rescuing’ old bikes to renovate, needs must…

  • Breadsall Open Gardens and Fete

    Back to news and articles ← A good afternoon publicising the Cycleway at the recent Breadsall Open Gardens and Fete event. A steady stream of interested people and some great conversations about the Cycleway. A great event until the storm appeared at 3.30 and sent everyone home (and nearly sent the gazebo across the field).

  • Bridges

    Back to news and articles ← One of our interesting challenges, as we run alongside the beautiful but winding Derwent, is to arrange bridges at the many places needed. Some bridges are already there and can be shared, others are in place for other purposes, like pedestrian, road, rail, or even pipes! Some will need…

  • Belper Goes Green Festival

    Back to news and articles ← Representatives of the Derwent Valley Cycleway were at the Belper Goes Green festival today and generated lots of interest in the project. Loads of people expressed their support for the project and stated how much it was needed and how they would make use of it. About 50 people…

  • On Yer Bike, Belper!

    Back to news and articles ← An interesting event is planned for the afternoon of Saturday 16th March 2024 in Belper. It is hoped that the Derwent Valley Trust will be attending the event to discuss progress and ideas regarding the Derwent Valley Cycleway Put the date in the diary and we hope to see…

Leave a Reply

Your email address will not be published. Required fields are marked *